| Login |
Items where Industrial Sector is "Materials"
Group by: Creators | Item Type Number of items at this level: 186. ==, = (1988) Bubble formation and movement in aluminium reduction cells. [Study Group Report] =, = (1988) Buckling of rolled strip. [Study Group Report] =, = (1994) Courtaulds - Blebbing. [Study Group Report] =, = (1994) Crust formation in a (Ferro) Silicon Furnace. [Study Group Report] =, = (1985) Derivation of constitutive equations for macroscopic stress-strain processes and the interpretation of seismograms in underground coal mining. [Study Group Report] =, = (2000) [Determination of parameters at boundary in second cooling of continuous steeling]. [Study Group Report] =, = (1994) Drying of water-based paints. [Study Group Report] =, = (1986) Edge profile in hot rolling. [Study Group Report] =, = (1988) Effect of deposition of combustible matter onto electric power cables. [Study Group Report] =, = (1985) Explosively induced stress wave from a finite cylindrical source. [Study Group Report] =, = (1993) ICI Paints: Modulated differential scanning colorimetry. [Study Group Report] =, = (1998) Laser drilling. [Study Group Report] =, = (1993) Micro-droplet formation in high current vacuum electroplating. [Study Group Report] =, = (1985) Optimal control of a steel slab caster. [Study Group Report] =, = (1988) Piping in newsprint rolls. [Study Group Report] =, = (1993) Plate-fin heat exchangers. [Study Group Report] =, = (1998) Scroll Optimization. [Study Group Report] =, = (1998) Stability of Stationary Velocity Profiles in Fiber Spinning. [Study Group Report] =, = (1993) Stuffer box crimping. [Study Group Report] =, = (1993) Surface tension and interface shear effects in plate-fin passages. [Study Group Report] =, = (1998) Thermally Pressing Corner Profiles. [Study Group Report] =, = (1986) Two phase flow of hot plastic through a cold mould. [Study Group Report] =, = (1986) Warping of moulded plastics. [Study Group Report] =, = (1993) The effects of confinement on explosive detonation in boreholes. [Study Group Report] =, = (1985) The feasibility of casting steel in a continuous sheet. [Study Group Report] =, = (1985) An investigation of die designs for tube drawing. [Study Group Report] =, = (1986) The premature wearing of a BOS Lance. [Study Group Report] AA., Crosby and N., Deacon and J., Dewynne and A., Lacey and W., Lee and J., Ockendon and R., Whittaker (2011) Efficient Si-melting (PLEASE EMAIL david.allwright@industrialmaths.net FOR A COPY). [Study Group Report] Acosta, Gabriel and Garcia, Patricia and Gonzalez, Juan D. and Estéfano, R. Alexis Muñoz (2010) Optimización del Tratamiento Térmico de Productos Tubulares de Acero. [Study Group Report] Addison, J. and Budd, C. and Forth, S. and Grinfield, M. and Harris, T. and Hogg, A. and Lister, J. and Tabraham, J. and Taylor, J. and Wylie, J. (1996) Deposition of Charged Powder Particles. [Study Group Report] Aitchison, Joyce and Cummings, Linda and Richardson, Giles and Rougier, Jonathan (2005) Uncertainty of flow in porous media. [Study Group Report] Alfie, Ezequiel and Guozden, Tomas and Maestri, Mauricio and Martnez, Julian and Sosa, Sebastian and Ziella, Daniel (2010) Monitoreo Inteligente de Procesos. [Study Group Report] Allwright, D. J. (2001) The scanning vibrating needle curemeter. [Study Group Report] Allwright, David and Jones, Gareth and Parnell, William (2006) Acoustic scattering from a strained region. [Study Group Report] Ambati, Vijaya Raghav and Asheim, Andreas and van den Berg, Jan Bouwe and van Gennip, Yves and Gerasimov, Tymofiy and Hlod, Andriy and Planque, Bob and van der Schans, Martin and van der Stelt, Sjors and Rivera, Michelangelo Vargas (2008) Some studies on the deformation of the membrane in an RF MEMS switch. [Study Group Report] Ambrose, David and Braun, Richard and DeBisschop, Cynthia and Gremaud, Pierre and Howell, Peter and Kramer, Peter and Please, Colin and Salazar Gonzalez, Jose Domingo and Schwendeman, Donald (2002) Boundary Layers and Material Deformation in Fiber Drawing. [Study Group Report] Anderson, D. M. and Bohun, C. S. and Breward, C. and Fehribach, J. D. and Melara, L. and Please, C.P. and Richardson, G. and Vernescu, B. and Arroyo, A. and Bellsky, T. and Bui Boi, A. M. and Chi, H. and Cipcigan, I. and Franklin, M. and Nguyen, L. and Siddique, J. and Swaminathan, S. and Trichtchenko, O. and Wang, Y. and Zhang, C. (2008) Modelling Li+ Ion Battery Electrode Properties. [Study Group Report] Anderssen, Bob and Fowkes, Neville and Hickson, Roslyn and McGuinness, Mark (2009) Analysis of coil slumping. [Study Group Report] Arian, Eyal and Lacey, Andrew and McCuan, John and Monk, Peter and Pelesko, John A. and Rakesh and Please, Colin and Raymond, Chris and Schwendeman, Don and Witelski, Tom (2000) Inverse problems for glass. [Study Group Report] BB., G.B. and C., A.R. and G., J. and H., G.W. and L., J. and M., A.B. and M., N.V. and O., G. and Ockendon, J.R. and P., M.A. and S., S. and W., L. and W., J.P. (1997) Bulkhead Failure due to Flooded Holds. [Study Group Report] Balmashnova, E. and Bruurmijn, M. and Dissanayake, R. and Duits, R. and Kampmeijer, L. and van Noorden, T. (2012) Image Recognition of Shape Defects in Hot Steel Rolling. [Study Group Report] Barton, N. (1992) Atomisation of molten Zinc. [Study Group Report] Barton, N. (1989) Droplet cooling of galvanised iron. [Study Group Report] Barton, N. and Stokes, N. (1995) Microwave heating of flowing slurry. [Study Group Report] Barton, N.G. and Wake, G.C. (1997) Copper ore heap leaching. [Study Group Report] Berg, J.B. and Bokhove, O. and Peletier, M. and Williams, J.F. and Zwart, H. (2000) Thermal Modeling in Polymer Extrusion. [Study Group Report] Beuscher, Uwe and Bayram, Saziye and Broadbridge, Philip and Driscoll, Toby and Edwards, David A. and Fehribach, Joseph and Graham-Eagle, James and Haskett, Ryan and Heryudono, Alfa and Huang, Huaxiong and Larson, Dale and Moore, Richard and Pennell, Steve and Raymond, Chris and Ronkese, Bob and Rossi, Lou and Srinivasan, Ravi (2004) Multi-Phase Flow in a Thin Porous Material. [Study Group Report] Bhattacharya, A. and Breward, C.J.W. and Gratton, M. and Evans, J. and Nicholas, M. and Please, C. and Schwendeman, D. and Surles, M. and Witelski, T. (2005) Lubrication Layer Perturbations in Chemical-Mechanical Polishing. [Study Group Report] Blicblau, A. and Clements, D. (1995) Mechanical characteristics of carbon fibre yacht masts. [Study Group Report] Bohun, C. Sean (2011) Modelling mass transfer in a rotating disk reaction vessel. [Study Group Report] Bohun, C.S. and Gravesen, J. and Laurie, H. and Hansen, J. (2006) Polar plots of diamond surface energy. [Study Group Report] Bohun, Sean C. (2001) Modelling InSb Czochralski Growth. [Study Group Report] Bolchover, P. and Myers, T.G. and Peletier, M. and Wadee, M.A. (1998) Behaviour of Bentonite Clay in Toxic Waste Barriers. [Study Group Report] Bourland, J. (1995) Determining Index Data from Refracted/Diffracted Rays. [Study Group Report] Bradley, A. and Cooker, M.J. and Dellar, P.J. and Fitt, A.D. and Fowler, A.C. and Keener, J.P. and King, J.R. and Lacey, A.A. and Lee, W.T. and Mitchell, S.L. and Richardson, G. and Vynnycky, M. (2011) Foam formation in the plastics industry. [Study Group Report] Braun, Richard and Breward, Chris and Cook, L. Pamela and Cromer, Mike and Edwards, David A. and Hibdon, Joseph and Please, Colin and Taroni, Michele and Zhang, Shangyou (2009) Development and Persistence of 'Static' or 'Dead' Zones in Flows. [Study Group Report] Breward, C. and Cumberbatch, E. and Cummings, L. J. and Please, C. and Richardson, G. and Schwendeman, D. W. and Tilley, B. S. and Ahmed, S. and Fosse, E. and Gewecke, N. and Guevara, A. and Xu, K. (2008) Evolution of an elliptical bubble in an accelerating extensional flow. [Study Group Report] Breward, C.J.W. and Griffiths, I. and Potter, H. and Taroni, M. (2011) Matched Asymptotic Solutions of Glass Temperature Profiles During Optical Fibre Drawing. [Study Group Report] Breward, Chris and Dyson, Rosemary and Edwards, Carina and Metcalfe, Paul and Please, Colin and Zyskin, Maxim (2005) Modelling of melt on spinning wheels. [Study Group Report] Brewster, M. and Dellar, P. and Entov, V. and Fliert, B. vd. and Fowler, A. and Grover, B. and Hinch, E. J. and Lister, J. and Ng, F. and Schulze, T. (1996) Gas release from sludge. [Study Group Report] Broadgate, M. and Cheng, Q. and Hayward, N. and Jennings, L. (2001) Using fractals and power laws to predict the location of mineral deposits. [Study Group Report] Brummitt, C. and Foisy, C. and Halliwell, G. and Higley, M. and Kotil, S. and Kramer, P.R. and Longla, M. and Reyna, M. (2010) Automated Defect Detection: Computational Methods to Detect Flaws in Industrial Parts. [Study Group Report] Budd, C J and Hewitt, Ian and Mitchell, Sarah and Coles, Chris and Rankin, James and Rodrigues, David and O’Brien, Mick and McKee, Sean and Vynnycky, Michael and King, John and McGinty, Sean (2008) Laser Welding of a Stent. [Study Group Report] Budd, C. and Chapman, S.J. and King, J. and Lacey, A.A. and Larson, D. and Peletier, M. and Please, C.P. and Riley, D. and Wheeler, A. and Wood, G. (1995) Temperature variations and control of a Calciner. [Study Group Report] Byatt-Smith, J. and Day, R. and Harlen, O. and Howison, S.D. and Lister, J. and Smith, S.L. and Stone, R. (1996) Minimum Particle Size for Cyclone Dust Separator. [Study Group Report] Byatt-Smith, J. and Day, R. and Harlen, O. and Lister, J. and Smith, S.L. and Please, C.P. and Stone, R. and Howison, S.D. and Fowler, A. (1996) Temperature of diesel fuel spray at injector nozzle hole exit. [Study Group Report] CCargill, D. and Fehribach, J. and Lin, T-S and Please, Colin and Raymond, C. and Schwendeman, D. and Skorczewski, T. and Tilley, B. and Witelski, T. and Wrobel, J. and Wang, J. and Zhang, S. (2009) Homogenization of the Equations Governing the Flow Between a Slider and a Rough Spinning Disk. [Study Group Report] Carnie, S. (1999) Design and loading of dragline buckets. [Study Group Report] Carnie, S. and White, L. (1995) PVC autoclave model. [Study Group Report] Cawse, Kerry-Anne and Damelin, Steven and du Plessis, Louis and McIntyre, Richard and Mitchley, Michael and Michael, Sears (2008) An investigation of data compression techniques for hyperspectral core imager data. [Study Group Report] Cellai, D. and Cregan, V. and Curtis, M. and Fowler, A. and Hinch, J. and Hocking, G. and McGuinness, M. and Murnane, J. and O'Brien, S. and Smith, N. (2012) Particle size segregation in granular flow in silos. [Study Group Report] Chapman, S.J. and Dellar, P. and Fitt, A.D. and Herraiz, L. and Howison, S.D. and King, J. and Lacey, A.A. and Nikolopoulos, C. and Parrott, K. and Please, C.P. (1997) Thermo-Electric Problem in the Søderberg Electrode. [Study Group Report] Chapman, S.J. and Fitt, A.D. and Ockendon, H. and Pulos, G. (1997) Injection moulding of key blanks with Zinalco. [Study Group Report] Chapman, S.J. and Fitt, A.D. and Pulos, G. (1997) Vacuum moulding of a superplastic. [Study Group Report] Charpin, J. and Dewynne, J. and Fehribach, J. and Hinch, E. J. and Howison, S.D. and Lacey, A.A. and Liakhovetski, G. and Ockendon, J.R. (2000) Electrode Breakage. [Study Group Report] Charpin, J. and Myers, T. and Fitt, A.D. and Fowkes, N. and Ballim, Y. and Patini, A.P. (2004) Piped water cooling of concrete dams. [Study Group Report] Charpin, J. and Myers, T. and Sjoberg, A. and Ballim, Y. (2006) Modelling the temperature, maturity and moisture content in a drying concrete block. [Study Group Report] Charpin, J. P. F. and Fowkes, N. and Khalique, M. and Mason, D. P. and Myers, T. G. and Mureithi, E. and Sjoberg, A. and Vakaskar, D. C. (2008) Wrinkling of paper labels on beer bottles. [Study Group Report] Charpin, J.P.D. and Myers, T.G. and Fitt, A.D. and Ballim, Y. and Patini, A. (2004) Modelling surface heat exchanges from a concrete block to the environment. [Study Group Report] Charpin, J.P.F. and Myers, T.G. and Lombe, M. and de Hill, P. (2004) Transportation of water-based slurry in an open furrow, launder or stream. [Study Group Report] Cimpeanu, R. and Devine, M. and Donohue, J. and Hocking, G. and Holohan, N. and McCarthy, S. and van Wijk, S. (2013) Optimisation of bulk carrier loading and discharge. [Study Group Report] Cooke, W. and Howell, P. (1998) Viscoelastic behaviour of glass and "fictive temperature". [Study Group Report] Cooker, Mark and Dellar, Paul (2008) An Investigation into the Physics of Blowing Polysilicon Fuses. [Study Group Report] Craster, R. and Cumberbatch, E. and Day, R. and Fliert, B. vd. and Harlen, O. and Lister, J. and Smith, S.L. and Malcolm, T. (1995) Design of moulded valve. [Study Group Report] Craster, R. and Cumberbatch, E. and Day, R. and vd. Fliert, B. and Harlen, O. and Lister, J. and Smith, S.L. and Malcolm, T. (1995) An Improved Two-Phase Flow Model of the Compression of Paste Briquettes. [Study Group Report] Curtis, John P. and Black, Jonathan and Chapman, Lloyd and Connaughton, Colm and Cooker, Mark J. and Coskun, Erhan and Davies, Russell and Fernandez, Andrea and Hall, Cameron and Lacey, A.A. and Ockendon, J.R. and Please, C.P. and Ranner, Tom and Skorski, Maciej and Wang, Chang (2012) A Model for the Reduction of Specific Surface Area of Powders with Age. [Study Group Report] DDaneshbod, Yousef and Kominiarczuk, Jakub and Kreykes, Jason and Nadim, Ali (2009) Akonni Biosystems: Wicking in Microchannels on Biochips. [Study Group Report] Day, R. and Harlen, O. and Hinch, E. J. and King, J. and Lacey, A.A. and Lister, J. and Ockendon, J. and Wattis, J. and Worster, G. (1995) Ink Drying in Inkjet Printers. [Study Group Report] Dellar, P. (1999) Mixing in the downward displacement of a turbulent wash by a laminar spacer or cement slurry. [Study Group Report] Dellar, P. and Allwright, D.J. (2003) Biomimetic spinning of spider silk. [Study Group Report] Dellar, P.J. and Hjorth, P.G. and Bohun, C. S. and Ockendon, J.R. (2006) Etch rate prediction for iron milling machines. [Study Group Report] Dewynne, J. (1998) Diffusion of Titanium Oxide into Sapphire. [Study Group Report] Duursma, G. and Ockendon, J.R. and Wilmott, P. (1991) Dynamic behaviour of jets and spouts in fluidized beds. [Study Group Report] EEdwards, David A. (2013) Phase Field Formulation for Microstructure Evolution in Oxide Ceramics. [Study Group Report] FFackerell, T. and Fraser, B. (1996) Modelling optical fibre cable. [Study Group Report] Fitt, A.D. and Fowkes, N.D. and Mason, D.P. and Myers, T.G. and Moss, E.A. and Cheng, J. (2004) Fracturing rock with ultra high pressure water. [Study Group Report] Fitt, A.D. and Howell, P.D. (1998) An Improved Two-Phase Flow Model of the Compression of Paste Briquettes. [Study Group Report] Fitt, A.D. and Howell, P.D. (1997) The Manufacture of Continuous Electrodes using Paste Briquettes. [Study Group Report] Fitt, A.D. and Ockendon, J.R. and Please, C.P. (2000) A two-phase flow model for the cooling of steel by water sprays. [Study Group Report] Fitt, A.D. and Schwendeman, D. (1999) The Dynamics of a Roll Press Nip. [Study Group Report] Fitt, A.D. and Wilmott, P. (1991) Segregation of a Two Species Granular Flow. [Study Group Report] Fowkes, N. and Mureithi, E. (2008) Rockbursts and mud. [Study Group Report] Fowkes, N.D. and Mason, D.P. and Napier, J.A.L. (2004) Fault slip in a mining context. [Study Group Report] Fowkes, ND and Mambili Mamboundou, H and Makinde, OD and Ballim, Y and Patini, A (2004) Maturity effects in concrete dams. [Study Group Report] Fowler, Andrew and Gonzalez, Maria and Hegarty, Alan and King, John and Ockendon, Hilary and O’Brien, Stephen and Robinson, Marguerite and Shishkin, G. I. and Tocher, David and Wang, Qi (2008) Acid Polishing of Lead Crystal Glass. [Study Group Report] Fraser, W. Barrie and Macaskill, Charlie and McGuiness, Mark and Thornton, Aaron (2007) Strip Track-Off and Buckling between Transport Rollers. [Study Group Report] French, D.A. and Pelesko, J.A. and Braun, R. (1999) A Mathematical Model for Epitaxial Semiconductor Crystal Growth from the Vapor Phase on a Masked Substrate. [Study Group Report] GGates, D. (1992) Modelling and simulation of a vibroformer for carbon anodes used in aluminium production. [Study Group Report] Gates, D. (1989) Resonant whirling of two-piece propshafts in rear-wheel-drive cars. [Study Group Report] Gravesen, J. and Noble, S. (2002) Sequencing spinning lines. [Study Group Report] Griffiths, I. and Gallimore, L. (2011) Filtercake forming mechanisms at fracture and cavity openings. [Study Group Report] HHa, J. (1991) Modelling linered engine blocks. [Study Group Report] Hadj-Sassi, K. and Clawson, R. (2011) Formation Response of High Frequency Electromagnetic Waves. [Study Group Report] Hinch, E. J. (1998) Friction welding. [Study Group Report] Hjorth, P.G. and King, J. and Korobeinikov, A. and Mason, J. and McKee, S. and Wilson, S. (2008) Stryker Osteonics: Prosthetic Knee Joint. [Study Group Report] Hocking, Graeme and Sweatman, Winston and Roberts, Melanie and Fitt, Alistair (2009) Coating deformations in the continuous hot-dipped galvanizing process. [Study Group Report] Hof, B. and Margaretha, H. and Susanto, H. and Beckum, F. van (2000) Caravan Awnings: a Geometrical Problem. [Study Group Report] Hoog, F. (1994) A simple model for the cold rolling of metal foil. [Study Group Report] Howell, Peter and Kedzior, M. and Kramer, P. and Please, Colin and Rossi, Louis and Saintval, W. and Salazar, D. and Witelski, T. (2002) Shape optimization of pressurized air bearings. [Study Group Report] Howells, I.D. and =, = (1986) Some mathematical aspects of Hollow Fibre Ultrafiltration. [Study Group Report] Howlett, P.G. and Thompson, C.J. (1997) Modelling and optimisation of low solids waste treatment processes. [Study Group Report] IIliev, P. and Stoykov, S. and Marković, B. and Datcheva, M. and Yovkov, L. and Liolios, K. and Menseidov, C. and Muething, N. and Barciaga, T. (2014) Rigorous and Approximated Solutions of the Consolidation Problem for a Soil Layer with Finite Thickness Under Cyclic Mechanical Loading. [Study Group Report] JJenkins, D. (1990) Transient model of a gas-fired furnace. [Study Group Report] Jenkins, D.R. and McElwain, S. (1997) Corrosion and wear in moulding boxes. [Study Group Report] KKetcheson, D. (2011) Iron Furnace Problem - What is the porosity distribution in the iron ore hopper? [Study Group Report] King, J. and Lacey, A.A. and Lister, J. and Schwendeman, D. and Tew, R. and Wilmott, P. (1991) Oscillation mark formation in continuous casting. [Study Group Report] King, J. and Please, C.P. and Hagan, P.S. (1990) Anthracite Carbonizer. [Study Group Report] Korobeinikov, A. and McCarthy, J. and Melnik, A. and Mooney, E. and Rojas, J. and Semkov, K. and Varghese, J. and Zhelev, T. (2010) Model based methodology development for energy recovery in ash heat exchange systems. [Study Group Report] LLacey, Andrew and Sorensen, Mads Peter (1998) Temperature and Moisture Gradients in Sugar Silos. [Study Group Report] Lamoureux, M. (1997) Inversion for Anisotropic Velocity Parameter. [Study Group Report] Lamoureux, Michael (2005) Seismic Image Analysis Using Local Spectra. [Study Group Report] Lattimer, T. and Ockendon, J.R. and Ockendon, H. (1997) Optimal Blower Design. [Study Group Report] Lister, J. and King, J. and Lacey, A.A. and Please, C.P. and Newman, R. and Vainas, B. and Grinfield, M. (1992) The initiation of corrosive pitting in metals. [Study Group Report] MMarchant, Tim and Taylor, Steve and Nickerson, Alysha (2005) Development of empirical relationships for metallurgical design of hot-rolled steel products. [Study Group Report] Marchant, Tim and Weir, Graham (2004) Earthquake damage in underground roadways. [Study Group Report] Margenov, S. and Velikova, E. and Revalski, J. (2014) Front Matter and Problem Statements. [Study Group Report] McElwain, S. (1991) Heat transfer in a continuous bloomcaster. [Study Group Report] McElwain, S. and Fulford, G. (1995) Moisture movement in bulk stockpiles. [Study Group Report] McElwain, S. and Weber, R. (1994) Reduction behaviour in Fastmet(TM) pellets. [Study Group Report] McGuinness, M.J. and Roberts, A.J. (2001) Efficient design of tall tapered feeders. [Study Group Report] McGuinness, Mark and Sweatman, Winston and Baowan, Duangkamon and Barry, Steve (2008) Annealing steel coils. [Study Group Report] McGuinness, Mark and Taylor, Stephen (2004) Strip Temperature in a metal coating line annealing furnace. [Study Group Report] Movchan, A. and Moriarty, J. and Rogers, T. and Green, W. A. and Peregrine, D. H. (1992) Spreading of melts. [Study Group Report] Myers, T. G. and Charpin, J. P. F. and Muchatibaya, G. and Ndaba, C. and Tshehla, S. (2008) Flow of a yield stress fluid through a notch (Modelling notch flow of viscous non-Newtonian fluids). [Study Group Report] Myers, T.G. and Wilson, S.K. and Dewynne, J. and Lacey, A.A. (1995) Bubble Bursting in Molten Glass. [Study Group Report] NNapier, J.A.L. (2006) Analysis of the potential mechanisms of rockbursts. [Study Group Report] OOckendon, J.R. (2000) Analysis of stress of cable rubber insulator. [Study Group Report] Ockendon, J.R. (1968) Oxford Study Groups with Industry (1968-1988) - 6 reports. [Study Group Report] PPalacios, Luz and Aggarwala, Rita (1999) Optimal Control for Multi-variable Problems. [Study Group Report] Pelesko, John A. and Schwendeman, D. W. (2004) Optimal Wear for a Laying Pipe. [Study Group Report] Peltekov, A. and Boyadzhiev, D. and Kozloski, M. and Varbanov, Z. and Minchev, Z. (2013) Optimization of the charging process in zinc hydrometallurgy. [Study Group Report] Please, C.P. and Fitt, A.D. (1995) The reduction of valve wear in proppant pumps. [Study Group Report] Please, C.P. and Jones, M. and Allwright, D.J. (2000) The J-Box Problem. [Study Group Report] Please, C.P. and Ockendon, H. and Howison, S.D. and Tighe, S. (1991) Long term behaviour of geothermal reservoirs. [Study Group Report] Pritchard, Geoffrey and Moloney, Paul and Russell, Ken and Whiten, Bill (2009) Provenance of sedimentary rocks. [Study Group Report] RRaymond, C. and Richardson, G. (2010) Modeling Electromagnetic Wave Interactions with Nanostructures in Plasmonic Devices. [Study Group Report] Robinson, N. (1991) Production life of tube swimmers. [Study Group Report] Robinson, N. (1990) Thin-walled beam optimisation. [Study Group Report] Rose, F. (1994) Modelling dispersion effects in paper-effective thickness estimates. [Study Group Report] Ryzhov, O.S. and Triantafillou, S. (1995) Ideal stresses produced in Welding. [Study Group Report] SS, McKee and J, Cuminato (1994) The flat iron device for measuring changes in conductivity. [Study Group Report] Schwartz, L. and White, L. (1994) Modelling of the dip-coating process. [Study Group Report] Scott, David and Russell, Ken (2006) Development of Empirical Relationships for the Mechanical Properties of Cold-Rolled Steel Products. [Study Group Report] Solanes, Jorge and Etcheverry, Javier (2010) Mejora de la pirometría infrarroja aplicada a hornos de recocido continuo. [Study Group Report] Stokes, J. (1991) Modelling the backwash process in micro filtration. [Study Group Report] Stokes, N. (1989) Thermodynamics of airburn of carbon anodes in aluminium reduction cells. [Study Group Report] Stokes, N. and Jenkins, D. (1994) Slag ladle insulation. [Study Group Report] Stokes, Y.M. and Pendleton, P. (2001) Drying and curing of stains and lacquers used in furniture finishing. [Study Group Report] TTan, Y. (2006) Identification of the pollution source in steel plant. [Study Group Report] Thompson, Alice B. and Richardson, G. and Dellar, Paul and McGuinness, M. and Budd, Chris (2010) Arc Phenomena in low-voltage current limiting circuit breakers. [Study Group Report] Thornton, A and Weinhart, T and Bokhove, O (2010) Modeling and Optimization of Algae Growth. [Study Group Report] Turkiyyah, G. (2011) Fast Simulation Models for History Dependent and Non-Linear Time Consuming Finite Element Analyses. [Study Group Report] ten Cate, Andreas and Geurts, Bernard J. and Muskulus, Michael and Koster, Daniel and Muntean, Adrian and van Opheusden, Joost and Peschansky, Alex and Vreman, Bert and Zegeling, Paul (2008) Modeling and simulation of phase-transitions in multicomponent aluminum alloy casting. [Study Group Report] VVelikova, G. and Georgiev, I. and Veneva, M. (2014) Effect of the Precipitation of Acid Soap and Alkanoic Acid Crystallites on the Bulk pH. [Study Group Report] van’t Hof, B and Molenaar, J and Ros, L and Zaal, M (2009) How to Mix Molecules with Mathematics. [Study Group Report] vd. Fliert, B. and Please, C.P. (1997) 'Mud-cracking' in a Latex paint film. [Study Group Report] WWard, M.J. (1997) Stress intensity In a thermoroll. [Study Group Report] Weber, R. (1993) Stratification in steelmaking ladles. [Study Group Report] Westbrook, R. (1997) Non-monotonic variation of stress intensity with flaw size in metal-lined fibre-reinforced pressure vessels. [Study Group Report] Westbrook, Rex (1998) Torsion in Multistrand Cables. [Study Group Report] Westbrook, Rex and Bohun, Sean C. (2002) Resistance Monitoring. [Study Group Report] Westcott, M. (1990) Modelling and analysis of wheel replacement and restoration. [Study Group Report] Whiten, Bill and McGuinness, Mark (2006) Sustainable Water Management in the Minerals Industry. [Study Group Report] Wilson, S. and Howison, S.D. and Parker, D. and Fitt, A.D. and Harlen, O. and Myers, T. and Please, C.P. and Hinch, E. J. and Chapman, S. J. and King, J. and Duursma, G. and Beckum, F. van and Riley, D. (1996) Void elimination in screen printed thick film dielectric pastes. [Study Group Report] Witelski, T. and Schwendeman, D. and Evans, P. (2005) Analysis of Pressurized Porous Air Bearings. [Study Group Report] YYin, Yaling (2005) Seismic Prediction of Reservoir Parameters. [Study Group Report] |
